基于残差决策的自动飞行控制系统远程实时故障诊断

针对自动飞行控制系统结构复杂、关联部件众多,发生故障时诊断时间长,从而影响飞机运行效率的问题,提出一种基于飞机通信寻址报告系统(ACARS)的远程实时故障诊断方案。首先,分析自动飞行控制系统的故障特点,设计搭建检测滤波器;然后,利用ACARS数据链实时发送的自动飞行控制系统的关键信息进行相关部件的残差计算,并根据残差决策算法进行故障诊断及定位;最后,针对不同故障部件残差间的差异大、决策门限无法统一的缺点,提出基于二次差值的残差决策改进算法,减缓了检测对象的整体变化趋势,降低了随机噪声和干扰的影响,避免了将瞬态故障诊断为系统故障的情况。实验仿真结果表明,基于二次差值的改进残差决策算法避免了多决策门限的复杂性,在采样时间为0.1 s的情况下,故障检测所需时间大约为2 s,故障检测时间大幅降低,有效故障检测率大于90%。     

改进ILoG算子的故障检测方法

针对强背景噪声干扰下轮对轴承故障特征微弱、难以准确检测的问题,提出了一种自适应改进高斯拉普拉斯(improved Laplacian of Gaussian,简称ILoG)算子的微弱故障检测方法。ILoG算子滤波器具有优良的信号突变特征检测能力,将其用于轮对轴承故障信号的冲击特征检测,同时利用水循环算法(water cycle algorithm,简称WCA)的寻优特性,并行搜寻筛选最佳的ILoG算子影响参数,通过对参数优化后ILoG算子滤波后信号做进一步包络解调分析,提取出轮对轴承微弱的故障特征信息。对实际轮对轴承外圈和内圈故障信号分析的结果表明,该方法可以有效检测出轴承微弱故障特征频率,故障检测效果优于小波阈值和多尺度形态学差值滤波方法。     

Carbon nanotube filter for heavy metal ion adsorption

This study investigated carbon nanotube filtration technology using catalyst particles supported on silicalite-1–biomorphic carbon materials (BCMs). Aqueous solutions of Mn(II), Cu(II), Cr(III), Cd(II), and Pb(II) were used to test the efficiency of heavy metal ions removal. Carbon nanotubes (CNTs) were synthesized and grown on BCMs by the chemical vapor deposition method catalyzed with the catalyst (Co, Fe, and Ni). The synthesized CNTs with Co– and Fe– nanoparticles were typically multi-walled carbon nanotubes, and they showed good crystallinity (I_D/I_G = 1.05) and yield of (11.10 and 8.86) %. The removal efficiency of Mn(II), Cu(II), Cr(III), Cd(II), and Pb(II) ions using Co-catalyzed CNT filter was 97.57%, 98.01%, 97.89%, 97.42%, and 99.99%, respectively.     

Retracted: State estimation of Takagi-Sugeno fuzzy system in networked control system with stochastic time delays under unknown attacks

This article concerns the event-triggered fuzzy filter design for Takagi-Sugeno (T-S) fuzzy systems subject to deception attacks under the stochastic multiple time-varying delays. A sequence of random variables, which are mutually independent but obey the Bernoulli distribution, is introduced to account for the randomly occurring communication delays. In order to efficiently utilize limited network communication bandwidth resources, the event-triggering scheme is adopted. A fuzzy filter with the attacked input signal is presented. Moreover, due to communication delays caused by event-triggering schemes and transmission, the filter adopts non-synchronous premise variables with the system. Then, by utilizing a model transformation technique, the fuzzy systems are developed. Furthermore, using the piecewise Lyapunov functional method technique, the resulting criterion provides sufficient conditions to ensure that fuzzy systems under deception attacks are stochastically stable with an H_∞ performance. Accordingly, the conditions for the co-design of the fuzzy filter and event-triggering schemes are given. Finally, numerical simulation with the industrial process provided to verify the proposed event-triggered design.     

Distributed Kalman filter for linear system with complex multi-channel stochastic uncertain parameter and decoupled local filters

This article considers a distributed Kalman filtering problem for linear system contaminated by complex multi-channel random uncertain parameter in which a number of nodes cooperative without central coordination to estimate a common state based on local measurements and data received from neighbors. We propose an approach to eliminate this error propagation. The proposed local filters are guaranteed to be stable under some mild conditions on certain global structural data, and their fusion yields the centralized Kalman estimate. Then, we extend this method to smoothing and deconvolution algorithm. Finally, simulation experiments demonstrate the validity of the proposed approach.     

生物氧化预处理中进气量实时预测数学模型研究

精准预测生物氧化预处理中的进气量对提高黄金提取率和节能降耗具有重要意义。以气体管流连续性方程和运动方程为控制方程，采用Preissmann隐格式法作为差分方法。同时，根据集合卡尔曼滤波(Ensemble Kalman filter，EnKF)算法原理，构造进气量、压强的状态空间模型。结果表明，基于气体管流控制方程建立的进气量模型预测结果与实际进气量观测值具有较好的一致性；与传统静态预测方法相比，EnKF同化方法引入实时观测值和模型参数的更新，有效提高了进气量的预测精度，其平均绝对误差、平均相对误差和均方根误差有明显的降低。可见，基于气体管流控制方程建立的预测模型结合EnKF同化方法是提高生物氧化槽进气量预测精度的有效手段。     

Voltage-mode first-order universal filter realizations based on subtractors

Two new voltage-mode (VM) first-order universal filters including two subtractors as active elements as well as one resistor and one capacitor (grounded) as passive components are proposed in this paper. Each of the proposed first-order universal filters can realize low-pass response, high-pass response with a low output impedance and all-pass response with a low output impedance simultaneously. As a result, each of them can be connected to any other VM structures easily. Neither of them suffers from passive element matching conditions. They are free from non-ideal current gains which are frequency dependent. Nevertheless, each of them does not have the feature of high input impedance. A lot of simulations where 0.13 µm IBM CMOS technology parameters are used are carried out through SPICE program. The power supply voltages of the subtractors are chosen as ±0.75 V. Each of the proposed first-order universal filters dissipates 1.77 mW. Furthermore, an experimental test is accomplished so as to show the performance of the first proposed first-order universal filter as an example.     

温度对生物净化滤柱中氨氮、铁、锰去除效果的影响

温度是生物净化滤柱运行的一个重要参数，采用生物净化滤柱处理模拟含氨氮、铁、锰地下水，考察水温从约25℃降到约6℃过程中氨氮、铁、锰的去除效果。结果表明，出水氨氮、总铁、锰的浓度分别低于0.15mg/L、0.1mg/L、0.05mg/L，均低于国家标准。出水总铁、锰均未受到水温下降的影响，但是出水氨氮浓度逐渐从约0.02mg/L升高到约0.12mg/L。进一步分析发现，铁主要在滤层的0~0.4m段去除，去除效果没有受到水温变化的影响。氨氮、锰主要在滤层的0~0.8m段去除，其沿程浓度均随水温降低而明显升高。氨氮、锰的生物去除符合一级动力学反应，水温为24.6℃、15.3℃、6.7℃时，两者的动力学常数k分别为0.154min^-1、0.186min^-1，0.143min^-1、0.175min^-1，0.103min^-1、0.163min^-1；半反应时间t_1/2分别为4.51min、3.72min，4.83min、3.96min，6.72min、4.24min。随着试验水温的降低，氨氮、锰的去除效果明显受到影响。     

单相并联型有源电力滤波器主电路参数耦合关系研究

单相并联型有源电力滤波器(SAPF)主电路参数之间存在一定的耦合关系,这对各参数值的合理选择有较大的影响。通过分析现有单/三相SAPF主电路交流侧电感以及直流侧电压、电容值等参数的计算方法,得到了具体的单相SAPF电路参数解析表达式。针对所得表达式各变量之间的耦合关系,在MATLAB中进行建模优化分析,得出一套完整的参数设计方案。保证在特定负载下补偿后谐波含量低于2%的综合优化目标。仿真和实验过程验证了所选参数的正确性。     

A multi-tone central divided difference frequency tracker with adaptive process noise covariance tuning

The problem of real-time frequency estimation of nonstationary multi-harmonic signals is important in many applications. In this paper, we propose a novel multi-frequency tracker based on a state-space representation of the signal with Cartesian filters and the second-order central divided difference filter (CDDF), which improves the performance of the extended Kalman filter (EKF) by using Stirling's interpolation method to approximate the mean and covariance of the state vector. A crucial element of the method is the adaptive scaling of the process noise covariance matrix appearing in the filter equations, as a function of the innovation sequence, which tunes the accuracy-reactivity trade-off of the filter. The proposed solution is evaluated against two approaches from the literature, namely the factorized adaptive notch filter (FANF) and the extended Kalman filter frequency tracker (EKFFT). Several experiments emphasize the estimation accuracy of the proposed method as well as the improved robustness with respect to initial errors and input signal complexity. The presented method appears to be particularly efficient with rapidly varying frequencies, thanks to the update mechanism that adjusts the filter parameters based on the amplitude of the estimation error.